LCR Meter

Product Image

LCR Meter

Product Code: LCR-4070

 

Features

  • 3½ Digit Display
  • 1,999 Count
  • Full Protection function, capacitor with the function of Self discharge
  • Auto Power Off (APO)

Special Function

  • Low Battery Indication Approx. <7.5V
  • Sampling Rate 3 times per second
  • Capacitance discharge protection ?
  • Power 9V (6F22) x 1

Standard Accessories : Soft Carrying Case, Test Lead, Manual

Dimension : 185(H) x 93(W) x 35(D)mm

 

CAPACITANCE
Range Resolution Accuracy
200pF 0.1pF ±2.5% of rdg + 5 digits
2nF 1pF —
20nF 10pF —
200nF 100pF —
2µF 1nF —
20µF 10nF —
200µF 100nF —
2000µF 1µF ±5.0% of rdg + 5 digits
INDUCTANCE
Range Resolution Accuracy
200µH 0.1µH ±3.0% of rdg + 5 digits
2mH 1µH ±2.0% of rdg + 5 digits
20mH 10µH —
200mH 100µH —
2H 1mH —
20H 10mH ±5.0% of rdg + 5 digits
RESISTANCE
Range Resolution Accuracy
20Ω 0.01Ω ±1.0% of rdg + 5 digits
200Ω 0.1Ω ±0.8% of rdg + 2 digits
2KΩ 1Ω —
20KΩ 10Ω —
200KΩ 100Ω —
20MΩ 10KΩ ±2.0% of rdg + 5 digits

Related Products

Industrial Supply Syndicate

LCR Meter

Product Image

LCR Meter

Product Code: BR 5810

Features
• 100Hz ~ 10kHz, four typical test frequency points
• Special large white back light LCD display screen
• 0.1V, 0.3V, 1.0V three typical test level
• 30W, 100W two signal source output impedance
• 4 bins comparator and bin counter .
• RS 232C and HANDLE interfaces.

General Specifications
• Display : 3½ Digit 1999 Counts Backlight LCD Display.
• Operating Temperature : 0 ~ 40 °C,R.H. <75%.
• Storage Temperature : -15 ~ 50 °C
• Power Supply : 9V Battery.
• Dimension : 158(L) x 79(W) x 47(H) mm
• Weight : approx. 300g

Related Products

Industrial Supply Syndicate

LCR meter

Product Image

LCR meter

Product Code: KM 460

Introduction
This LCR Meter handheld LCR is a portable hand-held measuring instrument for measuring the parameters of inductors, capacitors, resistors and other components. It is small with a 5V lithium battery, suitable for tabletype application.

This LCR Meter provides a resolution of four and a half digits for main parameters and a resolution of 0.0001 for secondary parameter. Its highest measurement frequency is 100kHz, and can measure the level of 0.6Vrms, and 0.3Vrms. Its automatic range can display the results in the fast, medium, or slow mode.

It can automatically select the appropriate measurement parameters according to the characteristics of the component. Its measurement accuracy can reach 0.2%. It combines the convenience of a handheld instrument and good performance of a table-type one.

The operation is simple, and users can see the test frequency, parameters, and speed by pressing the corresponding key; it also has the recording mode to take readings; the convenient operation of open and short circuit correction function helps improve the measurement accuracy.

The buzzer, automatic power off and languages can be set on the configuration menu. The standard instrument is equipped with remote communication function. The remote control and data acquisition are achieved by connecting it to the PC through Mini-USB cable for interface with customer's software.

General Specifications :
• Testing frequency : 100Hz, 120Hz, 1KHz, 10KHz, 40KHz, 100KHz
• Basic accuracy : 0.3%
• Electric level : 0.6Vrms
• Display : 2.8 inches TET LCD
• Digits display : Main parameter: 5 digits; auxiliary parameter: 5 digits
• Electrolytic capacitor mode

Measuring parameters :
• Main parameter : L / C / R / Z
• Auxiliary parameter : X/D/Q/ESR
• Measuring Range : (L) 0-2000H, (C) 0-20mF, ® 0-20M?
• Measuring speed : 1 time/s (slow), 2 times/s (moderate), 4 times/s (fast)
• Calibration function : Open circuit calibration, short circuit calibration
• Filtering function : Limit scope 1%~50% can be set; 1%, 5%, 10%, 20% are the fix points
• Errors measurement is use for comparing the percent errors between components and nominal value, meanwhile display
• Others : Backlight luminance can be adjustable; USB device and auto power off can be set
• Standard Accessories : Mini-USB cable; power adapter; short-circuit plate; plug made of red and black rubber; Lithium battery with large capacity

Related Products

Industrial Supply Syndicate

LCR meter

Product Image

LCR meter

Product Code: KM 461

Introduction
This LCR Meter handheld LCR is a portable hand-held measuring instrument for measuring the parameters of inductors, capacitors, resistors and other components. It is small with a 5V lithium battery, suitable for tabletype application.

This LCR Meter provides a resolution of four and a half digits for main parameters and a resolution of 0.0001 for secondary parameter. Its highest measurement frequency is 100kHz, and can measure the level of 0.6Vrms, and 0.3Vrms. Its automatic range can display the results in the fast, medium, or slow mode.

It can automatically select the appropriate measurement parameters according to the characteristics of the component. Its measurement accuracy can reach 0.2%. It combines the convenience of a handheld instrument and good performance of a table-type one.

The operation is simple, and users can see the test frequency, parameters, and speed by pressing the corresponding key; it also has the recording mode to take readings; the convenient operation of open and short circuit correction function helps improve the measurement accuracy.

The buzzer, automatic power off and languages can be set on the configuration menu. The standard instrument is equipped with remote communication function. The remote control and data acquisition are achieved by connecting it to the PC through Mini-USB cable for interface with customer's software.

General Specifications :
• Testing frequency : 100Hz-100KHz adjustable, step from 1Hz
• Basic accuracy : 0.2%
• Electrolytic capacitor mode
• DCR mode
• Bias Voltage : 0-500mV can be adjustable, step from 1mV
• Electric level : 0-0.7 adjustable
• Display : 2.8 inches TET LCD
• Digits display : Main parameter: 5 digits; auxiliary parameter: 5 digits

Measuring parameters :
• Main parameter : L / C / R / Z
• Auxiliary parameter : X/D/Q/Θ/ESR
• Measuring Range : (L) 0-2000H, (C) 0-20mF, (R) 0-20M Ω
• Measuring speed : 1 time/s (slow), 2 times/s (moderate), 4 times/s (fast)
• Calibration function : Open circuit calibration, short circuit calibration
• Filtering function : Limit scope 1%~50% can be set; 1%, 5%, 10%, 20% are the fix points
• Errors measurement is use for comparing the percent errors between components and nominal value, meanwhile display
• Others : Backlight luminance can be adjustable; USB device and auto power off can be set
• Standard Accessories : Mini-USB cable; power adapter; short-circuit plate; plug made of red and black rubber; Lithium battery with large capacity

Related Products

Industrial Supply Syndicate

LCR meter

Product Image

LCR meter

Product Code: KM-5812


Features
• 100Hz ~ 100kHz, eight typical test frequency points
• Special large white back light LCD display screen
• 0.1V, 0.3V, 1.0V three typical test level
• 30?,100? two signal source output impedance,
• 4 bins comparator and bin counter
• RS232C and HANDLE interfaces

Electrical Specifications :
• Test parameters : L / Q, C / D, R / Q, / Z. / ?, C / R, L / R
• Accuracy : 0.1%
• Test frequency : 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 30kHz, 60kHz, 100kHz
• Test level : 0.1Vrms, 0.3Vrms and 1 Vrms
• Output impedance : 30? or 100?
• Measurement range : C 0.001pF ~ 99999?F
L 0.001?H ~ 99999H
D 0.0001 ~ 9.9999
Q 0.0001~ 9999.9
?% -99.99% ~ 99.99%
• Measurement speed (times / sec.) : Slow : 2 Medium : 8 Fast : 16
• Equivalent circuit : Series / parallel
• Ranging mode : Auto / hold
• Trigger mode : Internal / external, manual
• Correction functions : Open / short and sweep corrections
• Display mode : Direct, ?ABS, ?%
• Display digits Primary and secondary display : 5 digits
• Comparator functions NG, P1, P2, P3, 4 bins
• Interface RS232C, HANDLER
• LCD : Special large white back light LCD display screen
• Power supply :110 ~ 127VAC 10% / 220 ~ 240VAC 10%, 50Hz 2Hz / 60Hz 2Hz
• Dimensions : 320(W) x 140(H) x 360(D) mm
• Weight : Approx. 3.5kg

Related Products